Dynamic response and typical characteristics analysis of tooth surface wear of face gear pair

PDF(2405 KB)

Journal of Vibration and Shock ›› 2023, Vol. 42 ›› Issue (10) : 323-330.

PENG Xianlong， YUE Hang， ZHOU Jian

Author information +

History +

Abstract

In order to reveal influences of tooth surface wear on face gear transmission, the face gear pair tooth contact analysis(TCA) method combining with adhesive wear formula was proposed. The relative displacement and contact stress on the face gear pair contact elliptical discrete points were obtained by using tooth contact analysis, wear depth was obtained from adhesive wear formula. The face gear pair tooth surface coordinate with wear was compiled, and systematic meshing stiffness under different wear was calculated in ABAQUS. Tooth surface wear was equivalent to tooth surface deviation, influence of different wear on static transmission error was discussed. Face gear pair’s normal and wear dynamic responses were compared, torsional influences on wear was analyzed. The results show gear wear mainly affects amplitude of meshing stiffness and transmission error, leading to the acceleration and meshing force amplitude’s rapid rises. Torsional increase aggravate wear. Compared with the dimensionless statistical index, the root mean acceleration square is more sensitive to wear faults.

Key words

face gear / tooth surface wear / meshing stiffness / transmission error / dynamic response

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations

PENG Xianlong， YUE Hang， ZHOU Jian. Dynamic response and typical characteristics analysis of tooth surface wear of face gear pair[J]. Journal of Vibration and Shock, 2023, 42(10): 323-330

References

[1] 马天祺. 面齿轮—面齿轮少齿差传动条件的研究[D]. 哈尔滨:哈尔滨工业大学,2021.
[2] 罗棚. 基于点蚀失效数滚机床齿轮箱齿轮接触疲劳寿命估算及可靠性研究[D]. 赣州:江西理工大学,2020.
[3] FLODIN A, ANDERSSON S. Simulation of mild wear in spur gears[J]. Wear,1997,207(1-2):16-23.
[4] SHEN Z, QIAO B, YANG L, et al. Evaluating the influence of tooth surface wear on TVMS of planetary gear set[J]. Mechanism and Machine Theory,2019,136:206-223.
[5] SHEN Z, QIAO B, YANG L,et al. Dynamic modeling of planetary gear set with tooth surface wear[J]. Procedia Manufacturing,2020,49:49-54.
[6] 张荣华,曹莉,周建星,等.行星齿轮传动的齿面动态磨损特性[J]. 西安交通大学学报,2021,55(08):42-49.
ZHANG Rong-hua, CAO Li, ZHOU Jian-xing,et al. Dynamic Tooth Surface Wear Characteristics of Planetary Gear Transmission.[J]. Journal of Xi'an Jiaotong University, 2021,55(08):42-49.
[7] WANG H, TANG L, ZHOU C,et al. Wear life prediction method of crowned double helical gear drive in point contact mixed elastohydrodynamic lubrication[J].Wear,2021,484–485: 204041.
[8] CHEN W, LEI Y, FU Y,et al. A study of effects of tooth surface wear on time-varying mesh stiffness of external spur gear considering wear evolution process[J]. Mechanism and Machine Theory,2021,155:104055.
[9] 周长江,雷玉英,汪红兵,等.准静态与动态载荷下斜齿轮齿面粘着磨损计算[J].机械工程学报,2018,54(23):10-22.
ZHOU Chang-jiang, LEI Yu-ying, WANG Hong-bing,et al. Adhesive Wear Models for Helical Gears under Quasi-static and Dynamic Loads[J]. Journal of Mechanical Engineering, 2018,54(23):10-22.
[10] 孙秀全,王铁,张瑞亮,等.斜齿轮渐进性磨损对齿轮振动特性的影响分析[J]. 机械传动,2021,45(01):17-22.
SUN Xiu-quan, Wang Tie, Zhang Rui-liang, et al. Analysis of the Influence of Progressive Wear of Helical Gear on Gear Vibration Characteristic[J]. Journal of Mechanical Transmission, 2021,45(01):17-22.
[11] 蒋进科,刘钊,刘红梅. Ease-off修形准双曲面齿轮齿面动态抗磨设计与分析[J]. 机械工程学报,2021,57(19):155-164.
JIANG Jin-ke, LIU Zhao, LIU Hong-mei. Dynamic Anti-wear Design and Analysis for Hypoid Gears with Ease-off Flank Modification[J]. Journal of Mechanical Engineering, 2021,57(19):155-164.
[12] HUANG D, WANG Z, KUBO A.Hypoid gear integrated wear model and experimental verification design and test[J]. International Journal of Mechanical Sciences,2020,166: 105228
[13] 蒋进科,刘钊,刘红梅.齿面磨损最小直齿锥齿轮Ease-off修形设计与分析[J]. 西安交通大学学报,2020,54(06):99-106.
JIANG Jin-ke, LIU Zhao, LIU Hong-mei. Design and Analysis for Straight Bevel Gears with Ease-off Flank Modification Based on Minimal Wear[J]. Journal of Xi'an Jiaotong University,2020,54(06):99-106.
[14] 彭先龙,徐琪超,乔心州.直刃刀具加工的面齿轮承载接触特性[J]. 西安科技大学学报,2021,41(03):531-539.
PENG Xian-long, XU Qi-chao, QIAO Xin-zhou. Loaded tooth contact performance of a face gear manufactured by plane-cutter[J]. Journal of Xi'an University of Science and Technology,2021,41(03):531-539.
[15] 雷敦财,唐进元.一种面齿轮传动时变啮合刚度数值计算方法[J]. 中国机械工程,2014,25(17):2300-2304.
LEI Dun-cai, TANG Jin-yuan. A Calculation Method of Mesh Stiffness for Face Gear Transmission System[J]. China Mechanical Engineering,2014,25(17):2300-2304.
[16] 沈智宪,乔百杰,罗巍,等.齿轮磨损故障动态响应特征与诊断指标研究[J]. 机械工程学报,2021,57(17):120-131.
SHEN Zhi-xian, QIAO Bai-jie, LUO Wei, et al. Research on Dynamic Response Characteristics and Condition Indicators of Gear Wear Fault[J]. Journal of Mechanical Engineering, 2021,57(17):120-131.
[17] CHEN Z， SHAO Y. Mesh stiffness calculation of a spur gear pair with tooth profile modification and tooth root crack[J]. Mechanism and Machine Theory,2013,62(4):63-74.