Tests and numerical analysis for effects of polyurea coating on anti-knock performance of armor steel plate

PDF(2138 KB)

Journal of Vibration and Shock ›› 2023, Vol. 42 ›› Issue (13) : 251-258.

HE Jiahao1, WU Mengyang1, LI Gaowei1, SHI Wen2, SUN Xiaowang1, WANG Xianhui1

Author information +

History +

Abstract

In order to study the influence of polyurea coating spraying position and coating thickness on the explosion resistance of steel plate, 2 kg TNT explosive explosion tests were carried out on four different types of spraying structures and pure steel plate structures, and the test conditions were numerically simulated by LS-DYNA simulation software. The reliability of numerical calculation was verified by comparing the test results. At the same time, the stress wave attenuation characteristics in the front and back spraying structures were calculated and analyzed theoretically. On this basis, the influence of coating thickness on the explosion resistance of back sprayed structure is further studied. The results show that compared with the non-spraying, face-to-face and double-sided spraying structures, the back spraying shows more significant explosion resistance potential, and the large impedance ratio structure formed by it is an important reason for the effective attenuation of the peak value of stress wave; Under the condition of equal steel plate thickness, increasing the coating thickness can effectively improve the structural resistance, but the degree of improvement decreases with the increase of polyurea / steel plate thickness ratio; Under the condition of equal surface density, increasing the thickness of the coating will aggravate the damage of the structure.

Key words

polyurea coating / numerical calculation / explosion resistance / composite structure;

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations

HE Jiahao1, WU Mengyang1, LI Gaowei1, SHI Wen2, SUN Xiaowang1, WANG Xianhui1. Tests and numerical analysis for effects of polyurea coating on anti-knock performance of armor steel plate[J]. Journal of Vibration and Shock, 2023, 42(13): 251-258

References

[1] YI J, BOYCE M C, LEE G F, et al. Large deformation rate-dependent stress-strain behavior of polyurea and polyurethanes [J]. Polymer,2006,47(1):319-329.
[2] SARVA S S, DESCHANEL S, BOYCE M C. Stress-strain behavior of a polyurea and a polyurethane from low to high strain rates [J]. Polymer,2007,48(8):2208-2213.
[3] Amini M R, Isaacs J B, Nemat-Nasser S. Effect of polyurea on the dynamic response of steel plates[C]//Proceedings of the 2006 SEM Annual Conference and Exposition on Experimental and Applied Mechanics, St. Louis, MO.2006.
[4] Tchantchou F, et al. Journal of Neurotrauma,2018,35(10):1192-1203.
[5] Davidson J S, Fisher J W, Hammons MI, Porter JR, Dinan RJ. Failure mechanisms of polymer-reinforced concrete masonry walls subjected to blast[J]. J StructEng,2005,131(8):194-205.
[6] HOU H L, CHEN C H, CHENG Y S, et al. Effect of structural configuration on air blast resistance of polyurea-coated composite steel plates: experimental studies[J]. Materials & Design, 2019, 182: 108049.
[7] 甘云丹,宋力,杨黎明.弹性体涂覆钢板抗冲击性能的数值模拟 [J].兵工学报,2009,30(2):15-18.
Gan Y D, Song L, Yang L M. Numerical simulation of impact resistance of elastomer-coated steel sheet [J]. Journal of Military Engineering,2009,30(2):15-18.
[8] 赵鹏铎,张鹏,张磊,王志军,王琪,徐豫新.聚脲涂覆钢板结构抗爆性能试验研究[J].北京理工大学学报,2018,38(02):118-123.
Zhao pengduo, Zhang Peng, Zhang Lei, Wang Zhijun, Wang Qi, Xu Yuxin. Experimental study on explosion resistance of polyurea coated steel plate structure [J]. Journal of Beijing University of technology, 2018,38 (02): 118-123
[9] Dai L H, Wu C, An F J, et al. Experimental investigation of polyurea-coated steel plates at underwater explosive loading [J]. Advances in Materials Science and Engineering,2018, 2018: 1264276.
[10] Li Y, Chen Z H, Zhao T, et al. An experimental study on dynamic response of polyurea coated metal plates under intense underwater impulsive loading [J]. International Journal of Impact Engineering, 2019, 133: 103361.
[11] AEP-55, Volume 2 (Edition 1), 2006. “Procedures for Evaluating the Protection Level of Logistic and Light Armoured Vehicles.” NATO Standardization Agreements. Procedures For Evaluating The Protection Level Of Armoured Vehicles-Volume 2: Mine Threat[J].
[12] 戴平仁. 聚脲弹性体喷涂加固复合结构抗爆性能研究[D].南京理工大学,2018.
DAI Pingren. Research on anti-knock performance of polyurea elastomer spray-reinforced composite structure[D].Nanjing University of Science and Te-chnology,2018.
[13] Sarva S S, Deschanel S, Boyce M C, et al.Stress-strain behavior of a polyurea and a polyurethane from low to high strain rates [J].Polymer, 2007,48(8): 2208-2213.
[14] 赵凯. 分层防护层对爆炸波的衰减和弥散作用研究[D].中国科学技术大学,2007.
Zhao Kai. Research on the attenuation and dispersion of blast wave by layered protective layer [D]. University of Science and Technology of China, 2007.
[15] HALLQUIST J O. LS-DYNA keyword user’s manual [M]. Livermore Software Technology Corporation, 2007.
[16] 刘新让,田晓耕,卢天健,等.泡沫铝夹芯圆筒抗爆性能研究[J].振动与冲击,2012,31(23):166-173.
Liu X R, Tian X G, Lu T J, et al. Research on anti-explosion performance of foam aluminum sandwich cylinder [J]. Vibration and Shock, 2012, 31(23): 166-173.
[17] 张秀华,张唯佳,张宇.Q460高强钢柱在近爆荷载作用下的动力响应研究[J].振动与冲击,2022,41(03):107-114+147.
Zhang Xiuhua, Zhang Weijia, Zhang Yu. Research on dynamic response of Q460 high-strength steel column under near-explosion load [J]. Vibration and Shock, 2022, 41(03): 107-114+147.
[18] XUE L, MOCK W, BELYTSCHKOT. Penetration of DH-36 steel plates with and without polyurea coating [J]. Mechanics of Materials, 2010,42(11): 981-1003.