Analysis and test on the vibration response of an aero-engine rotor under impact load

NIE Weijian1,2,3, LU Yu2, TANG Guang2,3, YANG Xiaoguang1, WANG Jinshun2,3, CHEN Yanong2,3

Journal of Vibration and Shock ›› 2023, Vol. 42 ›› Issue (22) : 339-344.

PDF(1565 KB)
PDF(1565 KB)
Journal of Vibration and Shock ›› 2023, Vol. 42 ›› Issue (22) : 339-344.

Analysis and test on the vibration response of an aero-engine rotor under impact load

  • NIE Weijian1,2,3, LU Yu2, TANG Guang2,3, YANG Xiaoguang1, WANG Jinshun2,3, CHEN Yanong2,3
Author information +
History +

Abstract

Considering the SFD nonlinear oil film force, the differential equation of motion of the rotor was established. The vibration response of rotor under impact load was decomposed into harmonic response and impact response. The finite element models of harmonic response and impact response were established respectively, and the vibration response was calculated and analyzed. Experimental study on the vibration characteristics of aero-engine rotor under vertical impact load with different pulse width was carried out on the vibration table. The instantaneous vibration response of the rotor under impact load was obtained and compared with the test results. The study shows that in a certain rang of pulse width, the vibration response of rotor decreases with the increase of pulse width. In addition, compared with the test results, the calculation error of vibration response is between 10.44%~20.00%. The study provides a method for vibration response analysis and test of rotor under impact load, and has important engineering application value.

Key words

aero engine / flexible rotor / SFD / vibration response / dynamic characteristics / impact load

Cite this article

Download Citations
NIE Weijian1,2,3, LU Yu2, TANG Guang2,3, YANG Xiaoguang1, WANG Jinshun2,3, CHEN Yanong2,3. Analysis and test on the vibration response of an aero-engine rotor under impact load[J]. Journal of Vibration and Shock, 2023, 42(22): 339-344

References

[1] 姚念奎,周栋. 固定翼舰载机的全机落震试验[J].飞机设计,2014,34(4):31-36.
YAO Niankui, ZHOU Dong.Full-Scale Drop Test of Fixed-Wing Carrier-Based Aircraft[J].Aircraft Design,2014,34(4):31-36.
[2] 豆清波,杨智春,刘小川,等.舰载机全机落震试验方法[J].航空学报,2017,38(3): 1-9.
DOU Qingbo,YANG Zhichun,LIU Xiaochuan. et al.Drop test method of shipborne aircraft[J].Journal of Aeronautics, 2017,38(3):1-9.
[3] 豆清波,刘小川.舰载机全机落震试验机翼升力模拟方法研究[J].振动与冲击,2018,37(2):51-56.
DOU Qingbo, LIU Xiaochuan. Wing lift simulation method during full scale carrier-based aircraft drop tests[J]. Journal of Vibration and Shock, 2018,37(2):51-56.
[4] 付超. 冲击载荷作用下 25MW 船用汽轮机结构力学特性研究[D].哈尔滨:哈尔滨工业大学,2017.
Fu Chao. Study on  Mechanical Characteristics of 25MW Marine Turbine under Impact Load[D].Master degree, Harbin:Harbin Institute of Technology , 2017.
[5] 陈海龙,姚熊亮,张阿漫,等.船用典型动力设备抗冲击性能评估研究[J].振动与冲击,2009,28(2):45-50.
CHEN Hailong,YAO Xiongliang,ZHANG Aman, et al.Evaluation of impact resistance of typical marine power equipment[J]. Journal of Vibration and Shock, 2009,28(2):45-50.
[6] 万强,吴新跃 谢最伟.某燃气轮机高压转子—涡轮抗冲击性能研究[J].机械设计与制造,2012,(2):184-186.
WAN Qiang, WU Xinyue, XIE Zuiwei. Research on the anti-shock dynamical characteristics of the high-pressure rotor-turbo of a gas turbine[J]. Machinery Design & Manufacture, 2012,(2):184-186.
[7] 聂卫健,邓旺群,陈亚农,等.涡扇发动机柔性转子涡轮结构改进与动力特性研究[J].燃气涡轮试验与研究,2022,35(1):6-10.
NIE Weijian,DENG Wangqun,CHEN Yanonog, et al.Turbine structure improvement and dynamic characteristic studyof a flexible rotor for a turbofan engine[J].Gas Turbine Experiment and Research, 2022,35(1):6-10.
[8] 邓旺群,郭飞跃,高德平.航空发动机高速柔性转子动力特性计算[J].振动与冲击,2006,25(5) : 130-133.
DENG Wangqun, GUO Feiyue, GAO Deping.Dynamic characteristic calculation for a high speed flexible rotors of an aero-engine[J].Journal of Vibration and Shock,2006,25 (5) : 130-133.
[9] 邓旺群,王桢,舒斯荣,等.涡轴发动机细长柔性转子动力特性及高速动平衡技术研究[J].振动与冲击,2012,31(7) : 162-165.
DENG Wangqun,WANG Zhen,SHU Sirong,et al.Dynamic characteristics and high speed dynamic balance technique for a power turbine rotor of a turbo-shaft engine[J].Journal of Vibration and Shock,2012,31(7) : 162-165.
[10] 邓旺群,吴施志,刘文魁,等. 带柔性静子结构高速转子支承刚度修正方法[J]. 振动与冲击,2020,39(7) : 29-35,66.
DENG Wangqun, WU Shizhi, LIU Wenkui, et al.Support stiffness modification method for a high-speed rotor with flexible stator[J]. Journal of Vibration and Shock, 2020,39(7) : 29-35,66.
[11] 徐伟文, 张大海, 王平, 等. 转子挤压油膜阻尼器静偏心对减振效果的影响[J]. 振动与冲击, 2021, 40(21): 55-61.
XU Weiwen, ZHang Dahai, Wang Ping, et al. Effects of Static Eccentricity of Squeeze Film Damper on Vibration Reduction Effect of Rotor System[J]. Journal of Vibiation and Shock, 2018, 4(4): 84-86.
[12] 刘扬, 石拓, 辛喜成, 等. 转子挤压油膜阻尼器减振效率的理论研究[J]. 机械工程学报, 2019, 55(3): 90-98.
LIU Yang, SHI Tuo, XIN Xicheng, et al. Theoretical Study on the Damping Efficiency of Squeeze Film Damper on Rotor[J]. Journal of Mechanical Engineering, 2019, 55(3): 90-98.
[13] 刘展翅, 廖明夫, 丛佩红, 等. 静偏心对挤压油膜阻尼器减振特性影响实验研究[J]. 推进技术, 2016, 37(8): 1560-1568.
LIU Zhanchi, LIAO Mingfu, CONG Peihong, et al. Experimental Investigation for Effects of Static Eccentricity on Vibration Attenuating Characteristics of Squeeze Film Damper[J]. Journal of Propulsion Technology, 2016, 37(8): 1560-1568.
[14] 刘桂珍, 刘杨, 陈亚哲, 等. 转子-轴承系统油膜力特征的非线性动力学分析[J]. 中国工程机械学报, 2012, 10(2): 127-131.
LIU Guizhen, LIU Yang, CHEN Yazhe, et al. Nonlinear Dynamical Analysis on Oil-membrane Force Properties for Rotor-bearing Systems[J]. Chinese Journal of Construction Machinery, 2012, 10(2): 127-131.
[15] 杨喜关, 罗贵火, 唐振寰, 等. 高维反向旋转双转子系统的建模方法及动力特性[J]. 航空动力学报, 2014, 29(03): 585-595.
YANG Xiguan, LUO Guihuo, TANG Zhenhuan, et al. Modeling Method and Dynamic Characteristics of High-dimensional Counter-rotating Dual Rotor System[J]. Journal of Aerospace Power, 2014, 29(03): 585-595.
[16] CHIANG H W D, HSU C N, TU S H. Rotor-bearing analysis for turbo machinery single and dual-rotor systems[J]. Journal of Propulsion and Power, 2004, 20(6): 1096-1104.
[17] 刘桂珍, 刘杨, 陈亚哲, 等. 转子-轴承系统油膜力特征的非线性动力学分析[J]. 中国工程机械学报, 2012, 10(2): 127-131.
LIU Guizhen, LIU Yang, CHEN Yazhe, et al. Nonlinear Dynamical Analysis on Oil-membrane Force Properties for Rotor-bearing Systems[J]. Chinese Journal of Construction Machinery, 2012, 10(2): 127-131.
PDF(1565 KB)

Accesses

Citation

Detail

Sections
Recommended

/