Meso-microstructure evolution mechanism and residual strength tests of high-strength concrete after high temperature

PDF(4951 KB)

Journal of Vibration and Shock ›› 2024, Vol. 43 ›› Issue (9) : 214-225.

ZHAO Dongfu1,2,3,4,5, LI Hao1, HAO Tengfei1, LIU Mei1

Author information +

History +

Abstract

In order to analyze the meso-microstructure evolution mechanism and establish the relationship model between high temperature history and meso-microstructural evolution and the relationship model between high temperature history and residual strength, an experimental study was conducted on C60 high strength concrete specimens experiencing different heating temperature and constant temperature times. The internal temperature field of the specimens was measured by thermocouples and analyzed by finite element simulation analysis of ABAQUS. The result showed that the variation of temperature field in the two tests was basically consistent. The meso-microstructure changes after different high temperature history were analyzed qualitatively and quantitatively by scanning electron microscope (SEM), X-ray diffraction (XRD), microhardness test, mercury intrusion porosimetry (MIP) and ultrasonic, and the results of different means were related to each other. Then the relationship model between high temperature history and microstructural evolution was established. The residual compressive strength after high temperature history was obtained by strength test. Then the relationship model between high temperature history and residual strength was established. The research showed that as the heating temperature and time rose, the water of crystallization is lost, the hydrides and gels have different degrees of decomposition, the calcium hydroxide, dolomite and ettringite decreased, the acoustic time increased, the amplitude and frequency decreased, the microhardness decreased and the porosity increased. Finally, the relationship among high temperature history, meso-microstructure and residual strength of the high-strength concrete was obtained.

Key words

high-strength concrete / high temperature history / meso-microstructure / residual strength / temperature field

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations

ZHAO Dongfu1,2,3,4,5, LI Hao1, HAO Tengfei1, LIU Mei1. Meso-microstructure evolution mechanism and residual strength tests of high-strength concrete after high temperature[J]. Journal of Vibration and Shock, 2024, 43(9): 214-225

References

[1] Hossain K M A. Macro- and microstructural investigations on strength and durability of pumice concrete at high temperature [J]. Journal of Materials in Civil Engineering, 2006, 18(4): 527-536. [2] 赵东拂，高海静，贾朋贺，等.高强混凝土经不同高温历程后性能劣化研究[J].振动与冲击,2018,37(4):240-248. ZHAO Dong-fu, GAO Hai-jing, JIA Peng-he, et al. Performance degradation of high strength concrete (HSC) after different-high-temperature history [J]. Journal of Vibration and Shock, 2018, 37(4): 240-248. [3] 赵东拂，尤作凯，刘栋栋，等.高强混凝土过火温度与微观结构变化关系研究[J].建筑科学,2013,29(3):50-53. ZHAO Dong-fu, YOU Zuo-kai, LIU Dong-dong, et al Investigation on the relationship between fire temperature and change of microstructure in high strength concrete [J]. Building Science, 2013, 29(3), 50-53. [4] 柳献，袁勇，叶光，等.高性能混凝土高温微观结构演化研究[J].同济大学学报(自然科学版),2008,36(11):1473-1478. LIU Xian, YUAN Yong, YE Guang, et al. Study on pore structure evolution of high performance concrete with elevated temperatures [J]. Journal of Tongji University (Natural Science), 2008, 36(11): 1473-1478. [5] Bideci Ö S. The effect of high temperature on lightweight concretes produced with colemanite coated pumice aggregates [J]. Construction and Building Materials. 2016, 113: 631-640. [6] Pulkit U, Adhikary S D. Effect of micro-structural changes on concrete properties at elevated temperature: current knowledge and outlook [J]. Structural concrete, 2021, 23(04): 1995-2014. [7] Wu X G, Yang J H, Lin H X, et al. Mechanical properties and damage mechanism of shale ceramsite concrete after high-temperature treatment [J]. Journal of Materials in Civil Engineering, 2022, 34(07): 04022123. [8] Wang F Z, Yang J, Hu S G, et al. Influence of superabsorbent polymers on the surrounding cement paste [J]. Cement and Concrete Research, 2016, 81: 112-121. [9] Wang Y G, Li S P, Hughes P, et al. Mechanical properties and microstructure of basalt fibre and nano-silica reinforced recycled concrete after exposure to elevated temperatures [J]. Construction and Building Materials, 2020, 247: 118561. [10] Li Y Q, Luo Y M, Du H Y, et al. Evolution of Microstructural Characteristics of Carbonated Cement Pastes Subjected to High Temperatures Evaluated by MIP and SEM [J]. Materials, 2022, 15(17): 6037. [11] Aseem A, Baloch W L, Khushnood R A, et al. Structural health assessment of fire damaged building using non-destructive testing and micro-graphical forensic analysis: a case study [J]. Case Studies in Construction Material, 2019, 11: e00258. [12] Alaskar A, Albidah A, Alqarni A S, et al. Performance evaluation of high-strength concrete reinforced with basalt fibers exposed to elevated temperatures [J]. Journal of Building Engineering, 2021, 35: 102108. [13] 赵东拂，贾朋贺，刘慧璇，等.高温后高强混凝土单轴受压疲劳过程中细微观试验研究[J].振动与冲击,2018,37(12):83-88. ZHAO Dong-fu, JIA Peng-he, LIU Hui-xuan, et al. An experimental study on microstructure of high-strength concrete after high temperature and uniaxial compressive fatigue [J]. Journal of Vibration and Shock, 2018, 37(12): 83-88. [14] 赵东拂，刘慧璇，高海静.C60混凝土高温后低周循环受压疲劳性能研究[J].建筑结构学报,2018,39(05):116-123. ZHAO Dong-fu, LIU Hui-xuan, GAO Hai-jing. Research on fatigue properties of C60 concrete after high temperature under low cyclic compressive loading [J]. Journal of Building Structures, 2018, 39(05): 116-123. [15] Kim Y-S, Ohmiya Y, Kanematsu M, et al. Effect of aggregate on residual mechanical properties of heated ultra-high-strength concrete [J]. Materials and Structures, 2015, 49: 3847-3859. [16] Agrawal A, Kodur V, Residual Response of fire‐damaged high‐strength concrete beams [J]. Fire and Materials, 2019, 43(3): 310-322. [17] 赵东拂，刘梅.高强混凝土高温后剩余强度及无损检测试验研究[J].建筑结构学报,2015,36(S2):365-372. ZHAO Dong-fu, LIU Mei. Experimental study on residual strength and nondestructive testing of high strength concrete after high temperature [J]. Journal of Building Structures, 2015, 36(S2): 265-372. [18] 刘梅.高强混凝土温度历程与微观结构演化机理关系研究[D].北京：北京建筑大学，2017. LIU Mei, Research on relationships of temperature history and micro-structure evolution mechanism of high-strength concrete [D]. Beijing: Beijing University of Civil Engineering and Architecture, 2017. [19] Akca A H, Zihnioğlu Z Ö. High performance concrete under elevated temperatures [J]. Construction and Building Materials, 2013, 44: 317-328. [20] Kanéma M, Pliya P, Noumowé A, et al. Spalling, thermal, and hydrous behavior of ordinary and high-strength concrete subjected to elevated temperature [J]. Journal of Materials in Civil Engineering, 2011, 23(7): 921-930. [21] Arioz O. Effects of elevated temperatures on properties of concrete [J]. Fire Safety Journal, 2007, 42(8): 516-522. [22] Peng G F, Jiang Y C, Li B H, et al. Effect of high temperature on normal-strength high-performance concrete [J]. Materials Research Innovations, 2014, 18(S2): 290-293. [23] Fares H, Noumowe A, Remond S. Self-consolidating concrete subjected to high temperature: Mechanical and physicochemical properties [J]. Cement and Concrete Research, 2009, 39(12): 1230-1238. [24] Yan L, Xing Y M, Li J J. High-temperature mechanical properties and microscopic analysis of hybrid-fibre-reinforced high-performance concrete [J]. Magazine of Concrete Research, 2013, 65(3): 139-147. [25] Ren W B, Xu J Y, Bai E L. Strength and ultrasonic characteristics of alkali-activated fly ash-slag geopolymer concrete after exposure to elevated temperatures [J]. Journal of Materials in Civil Engineering. 2016, 28(2): 1943-5533.0001406, 04015124. [26] Saridemir M, Severcan M H, Ciflikli M, et al. The influence of elevated temperature on strength and microstructure of high strength concrete containing ground pumice and metakaolin [J]. Construction and Building Materials, 2016, 124: 244-257. [27] Du H X, Wu H P, Wang F J, et al. The detection of high-strength concrete exposed to high temperatures using infrared thermal imaging technique [J]. Materials Research Innovations, 2015, 19(S1): S1-162-S1-167. [28] Demirel B, Keleştemur O. Effect of elevated temperature on the mechanical properties of concrete produced with finely ground pumice and silica fume [J]. Fire Safety Journal, 2010, 45: 385-391. [29] Muthadhi A, Kothandaraman S. Experimental investigations on polymer-modified concrete subjected to elevated temperatures [J]. Materials and Structures, 2014， 47(6): 977-986. [30] Li M, Wu Z S, Kao H, et al. Evaluation of the fire-exposed temperature of concrete [J]. Magazine of Concrete Research, 2010, 62(9): 617-624.